Ground Rod Specification:

1) Thickness of the copper layer is more than 0.254mm
2) Our ground rods can be bended through a 30 or 90 or 135 degrees angle, and the
rods will be no evidence of cracking or splitting of the steel or the copper cladding
3) The advantages are good tensile strength more than 600N/mm2
4) Good in anticorrosion that usage-life is more than 50 years or more, constant
low resistance and good plasticity which had the characteristics of copper as well
as steel

We can supply you three shapes as:
1) Ground rod can be made double heads thread, thread can be packed by plastic sheath
2) One end is pointed and the other end is threaded for extend
3) One end is pointed and the other end is un-threaded

Cat. No	Nominal Diameter(inch) Actual Diameter(mm)	Length (Feet)	Thread Parameter	Sub./Master Bundle
GR384	3/8, 9.5mm	4	/	20/200
GR386		6	/	20/200
GR124	1/2 ,12.7mm	4	UNC-1/2	10/100
GR125		5	UNC-1/2	10/100
GR126		6	UNC-1/2	10/100
GR128		8	UNC-1/2	10/100
GR1210		10	UNC-1/2	10/100
GR584	5/8 , 14.2 mm	4	UNC-5/8 , M16	10/50
GR585		5	UNC-5/8 , M16	10/50
GR586		6	UNC-5/8 , M16	10/50
GR588		8	UNC-5/8 , M16	10/50
GR5810		10	UNC-5/8 , M16	10/50
GR344	3/4 , 17.2mm	4	UNC-3/4	5/50
GR345		5	UNC-3/4	5/50
GR346		6	UNC-3/4	5/50
GR348		8	UNC-3/4	5/50
GR3410		10	UNC-3/4	5/50